Flow Rate Detail

Flow Rate
Control and Measurement

Model FC

A peristaltic pump that delivers selected volume flow rates over a range determined by the setting of two calibrated potentiometer controls, and the tube set size chosen. It is similar to the pump used in the Pressure Servo control unit PS/200 described above. The Pressure Monitor (PM/4) is particularly useful in establishing vessel pressure during flow. Also see Q&A.

Features

Volume Flow Range: 3 µl/min - 2.5 ml/min

Linear and repeatable dial settings

Flow Output Signal

External voltage control of flow rate

Power: DC supply or Battery

Size: ~ 6 x 6 x 10 cm

Model FI - 1

Flow Indicator

Monitor and Record Flow Rate

& Externally Control Flow Rate

For LSI Peristaltic Pump Instruments:

Flow Control, Model FC

Pressure Servo Control, Models PS/200 & PS/20

Features

Monitor flow rate directly in µl/min on digital meter
Flow rate voltage signal output for recording
Program flow rate from computer D/A output or other voltage source
Single cable connection to your LSI pump units
Easy flow rate calibration using microprocessor panel meter
Calibration maintained when powered off

Specifications
   Flow Rate: 0 - 25 through 0 - 500 µl/min ranges
          Standard Ranges: 25, 50, 100, 200, 500 µl/min
          Accuracy: ± 3% ± 1 µl/min (over 5% to100% of range maximum)
          Precision: ± 1% or 1 µl/min
          Panel Meter Resolution: ± 1 µl/min
          Output Signal: 10 mV/µl/min
   Pressures: 0 - 200 mmHg; Linearity < ± 1%
                        Meter Resolution: ± 1 mmHg
                        Output Signals: 10 mV/mmHg
   Response Time: < 1 s
   Power: 117V/60 Hz or 230V/50 Hz