>> FC

Flow Control Peristaltic Pump

This miniature peristaltic pump delivers precise volume flow rates over a range determined by the setting of two calibrated potentiometer controls, and the tube set size chosen. It is similar to the pump used in the pressure servo control unit (PS-200).

Features
• Flow output signal
• External voltage control of flow rate

Specifications

Volume flow range	3 µl/min–2.4 ml/min*
Power	DC supply or battery (9 V)
Dimensions	6 cm W x 6 cm H x 10 cm D
*Depending on tube set used.

>> FC-KSK Kapton® Strip Kit

The Kapton® strip surrounding the peristaltic pump head on our FC pumps is an important component of the pump assembly. It improves pump accuracy and increases the life of each tube set. It should be replaced regularly to ensure that pump performance remains optimal. Each kit includes ten Kapton® strips, three pieces of grip paper, clip, and an installation tool.

>> FC-TS Replacement Tube Sets for FC Pump

Regular replacement of tube sets is important to ensure reliable performance and good working condition of your FC pump. Under regular usage conditions, tube sets should be replaced at least monthly. Tube sets are sold in packs of five. Below is an abbreviated list of our tube sets; many other options are also available.

Sizes

	Tubing ID	Flow Rates*
FC-TS-015	0.015"	3 to 80 µl/min
FC-TS-020	0.020"	7 to 180 µl/min
FC-TS-031	0.031"	13 to 350 µl/min
FC-TS-062	0.062"	50 µl/min to 1.25 ml/min
FC-TS-093	0.093"	117 µl/min to 2.4 ml/min
*Actual flow rates achieved may vary slightly.

front

back