This new cover is designed to fit our CH-1 and CH-2 standard single and dual vessel chambers. It replaces the cover that came with these chambers previously. This heated cover addresses problems such as evaporative fluid loss and fogging of the cover that can occur during long-term (several hours) vessel perfusion studies, especially using a stagnant bath fluid.

Evaporative loss can make accurate drug dosing very difficult. Cover fogging can distort the image of the blood vessel, as light entering the chamber from the microscope condenser is scattered by the fluid condensate gathering on the cover surface.

The CH-HC heated cover installs easily on standard single and dual vessel chambers (CH-1 and CH-2). The temperature of the heated cover can be regulated using our TC-09 series temperature controllers. For stand-alone applications, use a TC-09S to control the temperature of the CH-HC. To regulate the temperature of a self-heated chamber and the heated cover at the same time, use the TC-09D.

Our dissection hand support platform is designed to minimize hand strain and fatigue resulting from many hours spent dissecting and preparing cannulated blood vessels. It is ideally suited for dissection scopes that lack a base plate, or when dissections are conducted directly on a lab bench. Several holding frames are included that accept our CH-1 and CH-2 vessel chambers, our DD-90-S dissection
petri dish, and 35 mm dissection dishes. A mirror in the base can be used to reflect incident light for better visualization of some specimens. The base is heavily weighted to provide stability. Foam pads on either side of the holding frame provide a suitable surface to rest your wrists.

Features
• Facilitates vessel dissection and tying vessels on chamber cannulas
• Reduces hand strain
• Avoids sliding of dish or chamber
• Interchangeable holding frames for petri dishes and chambers
• Mirror in base to reflect incident light for better visualization
• Weighted base with non-slip feet